How do I locally schedule my MX beacon system?

This article discusses how to locally program a schedule for your MX system in the MX Field App.

Product applicability

The following products are discussed in this article:

  • MX Series: R829-MX

MX systems utilize the MX Field App for local programming, configuration and diagnostics. For more information on the mobile app please see our article here. A schedule can be built and uploaded to a system from your mobile device.

  1. Open the MX Field App.
  2. Tap on Schedules in the bottom dock and build your schedule.
  3. Tap on the system you wish to connect to.
    1. If required gain access to the system's power module and pair with the system.
  4. Tap on Operation and set the mode to Schedule.
  5. Tap on New Schedule and choose the schedule created in step 2. Tape Save to complete.

For complete instructions please see the MX Field App Guide here.

If there is an existing schedule loaded into the system from MX Cloud, any schedule you load locally via MX Field App will overwrite it and will be reflected so in MX Cloud.

There will be a “mobile device” icon for locally programmed or “cloud” icon remotely programmed schedule. 

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.