Can I provide my own wiring for MX systems?

This article details the option to provide your own bulk wiring for your MX system.

Product applicability

The following products are discussed in this article:

  • MX Series: R920-MX, R829-MX, R247-MX, CHEVRON-MX and WWD-MX

MX systems were designed for simple, flexible field wiring using cables with specific insulation colors that match color code markings on the modules' spring-cage terminals, which offer a reliable connection without the need for crimped terminals. Cut-and-stripped cables are available in several common lengths. Bulk cable is also available for installers who prefer to tailor each cable length individually. 


For those who wish to use their own cable, the following table describes the basic cable requirements. We recommend in all cases to use only tinned, stranded copper wire rated for the application according to all applicable building and electrical codes.

Function Conductors and Gauge Stock Wiring Color
Push button

2-conductor

20 AWG

 White/Green
Talking push button

6-conductor

20 AWG

 White/Green/Red/Black/Blue/Brown
Pedestrian sensor or radar

6-conductor

20 AWG

 White/Green/Red/Black/Blue/Brown
MX module-to-module

4-conductor

18 AWG

 Yellow/White/Red/Black

For more information see the LEVEL 1 System Planner guide here.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.