What are the default MX SpeedCheck Module settings?
This article details the defaults settings MX SpeedCheck Module's ship with.
Product applicability
The following products are discussed in this article:
- MX Series: SPEEDCHECK-MX
See the information below for default MX SpeedCheck Module settings:
| Setting | Value | Comments |
|---|---|---|
| Sign Mode | Continuous | Continuous (24/7 operation) Schedule (time-based operation) Stealth (data collection only; display off) Demo² (demonstration mode) |
| Speed Limit | 25 | This is used as a baseline for vehicle data collecting |
| Minimum Speed | 20 | Disabling will detect all vehicles up to the High Speed Cutoff value |
| Violation Alert (display LEDs flash) | Off (26¹) | Disabling will prevent the display from flashing |
| Slow Down Speed* | Off (30¹) | Disabling will turn off slow down display if installed |
| Strobe Speed* | Off (30¹) | Disabling will turn off strobe(s) if installed |
| High Speed Cutoff (max speed) | 45 | Disabling will detect all vehicles up to 99 (MPH or KPH) |
| Unit of Speed | MPH | MPH or KPH |
*option will only show if installed
¹default value if option is installed
²for demonstration purposes only
For MUTCD compliance the following should be set:
- Violation Alert = disabled
- Slow Down speed = disabled
- Strobe speed = disabled
Flashing beacons can only be controlled via the Schedule operation mode.