MX Series product update - new feature: chevron sequential flash pattern

This article details a new flash pattern for MX Series chevron LED sign systems.

Product applicability

This article applies to the following products:

  • MX Series: CHEVRON-MX

When did this update occur

MX Field App began supporting the sequential flash pattern starting in 2024 Q3. 

What software version is required

This feature requires MX Field App version 2.2 or newer.

What firmware version is required

This feature requires Chevron LED sign firmware version 2.8.7 or newer. Firmware is bundled with latest version of MX Field App.

Theory of operation

The chevron settings are exposed by changing the System Application to Chevron and then navigating to Chevron Configuration —> Flash Pattern Settings menu. The sequential flash pattern is unique which starts from the left/right leader (first system as you approach the chevrons) and runs in sequence to the last system.

For more information programming your CHEVRON-MX system, please see our article here.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.