[2023] RRFB product update - optional light shield

This article details an update to RRFBs: now with optional light shield.

Product applicability

The following products are discussed in this article:

  • E Series: R920-E 
  • F Series: R920-F
  • G Series: SC315-G
  • MX Series: R920-MX

When did this update occur

Carmanah started offering rectangular rapid flashing beacon (RRFB) light shields for E/F/G Series and MX Series beacon systems starting in 2023 Q1.

What are RRFB shields for

These shields help concentrate the visible light towards oncoming traffic. RRFB shields can be useful in urban environments where light may bleed into nearby residences.

Installation

  1. Remove screws from RRFB cover.
  2. Slight light shield over RRFB as shown.
  3. Align light shield holes with RRFB cover holes.
  4. Reinstall and tighten RRFB cover screws.
  5. Install opaque label on end of RRFB.

RRFB shields only come in powder coated black.

For information on RRFB shields please contact us at https://carmanah.com/contact-support/.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.